Home > ZWCAD > Dimensions and Tolerances >
Dimension Jogged

May 20, 2011

     The DIMJOGLINE command is available for adding or removing jog symbol for linear dimensions, showing a dimension value differs from it's factual measured dimension value. Generally, the value displayed here is greater than the actual measurement value.

    Jogged line is composed by two paralleled lines and a connecting line with 40 degree between them. As for the height of jogged line, user can set it from "Other Items" tab either in "Create New Dimension Style" dialog box or "Modify Dimension Style" dialog box.

    After adding jog symbol to the linear dimension, the jog is default to be placed at the center point between first extension line and dimension text, or center point based on the dimension text. To relocate jog symbol, you can adjust the position of dimension text or specify new position to locate jog after reselecting dimension.


To add a jog to linear dimension

  1.   Choose Dimension > Jogged Linear.

  2.   Select a linear dimension.

  3.   Specify a point on the dimension line to determine the jog symbol, or press ENTER directly to position the jog symbol in default place.

Dimension toolbar\

Command line  DIMJOGLINE

\


Commands Reference

DDEDIT: Edits text, dimension text, attribute definitions, and feature control frames

DIMEDIT: Edits dimensions

DIMJOGLINE: Adds or removes a jog on the specified linear dimension

DIMTEDIT: Moves and rotates dimension text

PROPERTIESES: Controls properties of existing objects

System Variables Reference

DIMCLRT: Assigns colors to dimension text

DIMDSEP: Specifies a single-character decimal separator to use when creating dimensions whose unit format is decimal

DIMJUST: Controls the horizontal positioning of dimension text

DIMTAD: Controls the vertical position of text in relation to the dimension line

DIMTIH: Controls the position of dimension text inside the extension lines for all dimension types except ordinate

DIMTMOVE: Sets dimension text movement rules

DIMTOH: Controls the position of dimension text outside the extension lines

DIMTVP: Controls the vertical position of dimension text above or below the dimension line

DIMUPT: Controls options for user-positioned text

MTEXTED: Sets the primary and secondary text editors to use for multiline text objects


 

PrintPrint Get a PDF version of this webpage PDF
2013 ZWCAD Software Co., Ltd. All rights reserved. | About ZWSOFT | Privacy Policy | Terms and Conditions | Contact us | Site Map