Some small techniques of using ZWCAD 4 (31-40)

May 20, 2011

31, Sometimes you want to delete the layers which is not applied or exists some entities. In this situation, you can use the Laytrans command to map the layer as 0 layer. Generally, Laytrans command can be used to delete all kinds of layers you want to delete.  

32, Text will be displayed as some rectangular frameworks while they are too small. In this situation, you can enter Textdegrade on the command line and set up the value as ON. This variable controls the text appearance.

33, The span of scroll button is too large while using to zoom out / in entities. It affects the operation efficiency. In this situation, you can enter Zoomfactor on the command line and select an appropriate value to control the zooming span

34, While saving files by ZWCAD automatically as DWG one, it always become as DWG.SV$. In this situation, please take a try in following way: on the IE browser, select Tool – Folders option – View. Then in the page, wipe off the “Hide extensions for known file type” option. After exiting the dialog box, rename the file again and you’ll see the right extension.

35, The ICAD.LSP files shall be loaded manually every time while creating a new DWG file or opening ZWCAD. If you want to load them automatically, you can enter the ACADLSPASDOC on the command line and select the value as ON.  

36, Sometimes you don’t want ZWCAD to create the BAK file automatically. There are two ways to do that. One way is to enter Options command and in the Open and Save tab, wipe off the “Create a backup copy with each save” option in the File Safety Precaution area. The other way is to enter Isavebak command and select the value as OFF. 

37, While moving the mouse in drawing area, the coordinate data on the status linedoesn’t change accordingly or display as gray. In this situation, there are two ways to change the setting. One is to press F6 button to switch the value, the others is enter Coords in command line and select the value as 1 or 2.

38, While selecting entities, the virtual framework generated from dragging the mouse becomes entitative framework and there are two intersectional points left. In this situation, you can enter Blipmode on the command line and select the value as OFF.

39, Sometimes the dimension arrow or track line drawed by the Trace command is not filled up. In this situation, you can enter Fillmode on the command line and select the value as ON. Then the entities will be filled up.

40, Sometimes the menus and toolbars in ZWCAD interface disappear abnormally. In this situation, there are two ways to restore the standard interface. One is to enter Options on the command line and click the Reset button in the Profiles tab. The others is to enter +customize on the command line and click the Reset button in the dialog box.  

Information

Review date: 2011-May-20
Applies to:
,ZWCAD 2008,ZWCAD 2009,ZWCAD 2010,ZWCAD 2011,

PrintPrint Get a PDF version of this webpage PDF
2013 ZWCAD Software Co., Ltd. Todos los Derechos Reservados. | Política de Privacidad | Términos y Condiciones | Mapa del Sitio