Undo command

vlad_simple — 2010-10-20 04:56:32

It was nov 2009. Jackson promised to "discuss with local distributor about the upgrade issue". But when new version (2010) released in jan 2010 I got "we could not provide upgrade to the end users directly". And distributers said "you should pay".

vlad_simple — 2010-10-19 07:25:32

I had email conversation with Amanda and than with Jackson from ZWSOFT support. Than they send me to local reseller. But resellers said 'you need to pay for upgrade'. vlad_simple2010-10-19 07:34:18

vlad_simple — 2010-10-18 04:44:05

Why our company should pay for glitches in your programm? It's repeats from one version to another. "we have problems in current version but pay for next and probably it will have less bugs" It's cheaper to buy stable Autocad LT 2009. We will not pay for your experiments more.

vlad_simple — 2010-10-12 00:59:03

Only R&D Department don't know about that. All other users who work on ZWCAD 2009i have troubles with it.

zw_admin — 2010-01-11 09:15:45

[QUOTE=vlad_simple]As for me it's a known glitch of 2009 and 2009i version. I wrote about that here and somebody wrote on this forum too (can't find now) Also about same problem I heared from at least 2 people on the russian forum. Can send links here if you can translate. To my mind it's most dangeros error. Because you can't redo. And ZWCAD don't left .SAV-files in that case. So, you can only open .BAK file and lost work of day.

Dear Vlad_simple,

Thank you for your information.Your feeling is understandable and sorry for the inconvenience that the

vlad_simple — 2010-01-10 19:59:55

As for me it's a known glitch of 2009 and 2009i version. I wrote about that here and somebody wrote on this forum too (can't find now) Also about same problem I heared from at least 2 people on the russian forum. Can send links here if you can translate. To my mind it's most dangeros error. Because you can't redo. And ZWCAD don't left .SAV-files in that case. So, you can only open .BAK file and lost work of day. vlad_simple2010-01-10 20:06:34

zw_admin — 2009-12-30 15:21:29

[QUOTE=IrishBanjo] we are testing ZWCAD 2009i professional trial. Great piece of software we are impressed except for the following problems. 1. The UNDO command will start by itself and undo a full set of changes on a drawing. 2. The program crashes daily. 3. Lines, Arcs, etc remain on screen and are not selectable( after 1. happens). Dear IrishBanjo, Sorry for replying to you so late. I am afraid that the problems you met may happen in certain drawings, because these problems didn't happen during our test work. So please send to us the drawing via email to tech@zwcad.com . We will try to find a solution for you ASAP. Sincerely wish you a Happy New Year. Best Regards Denny

zw_admin — 2009-12-30 15:11:07

[QUOTE=alf1000]and what with this above, Miss (Mrs) Amanda??? ---> undo still ... doesn't work correctly, ---> mstretch, as above ---> stretch in orto with osnap "extenstion" (if work "extension", doesn't work orto) ---> problem with too long lines "dot".. You know about all of this .. over a year!! THIS IS RECLAMATION TO ZWCAD 2009i!!! WHEN WE GET NEW ADJUSTMENT TO VER 2009i?? Dear Alf1000, Sorry for replying to you so late and the inconvenience these problems brought to you. We tested the "mstretch" command according to your description and found this function need to complete, so thank you very much for your suggestion. As to the undo problems, we have sent them to our R&D department and some of these problems are under solving now. In fact, part of these problems have been solved in our latest 2010 Beta trial version, which has released a few days ago and is faster and more stale than 2009i version. Here is the link for you to download this version: http://www.zwcad.org/DownFeedback.asp?DownType=1&ID=20 About the following two questions, please describe them more clear so that we can help you to find solutions. ---> stretch in orto with osnap "extenstion" (if work "extension", doesn't work orto) ---> problem with too long lines "dot".. The New Year is around the corner now, sincerely wish you a Happy New Year. Best Regards Denny Denny2009-12-30 15:12:30

alf1000 — 2009-12-29 23:40:55

and what with this above, Miss (Mrs) Amanda??? ---> undo still ... doesn't work correctly, ---> mstretch, as above ---> stretch in orto with osnap "extenstion" (if work "extension", doesn't work orto) ---> problem with too long lines "dot".. You know about all of this .. over a year!! THIS IS RECLAMATION TO ZWCAD 2009i!!! WHEN WE GET NEW ADJUSTMENT TO VER 2009i??

alf1000 — 2009-09-25 19:33:04

ZWCAD 2009i professional v 2009-07-30 I subscribe into this.. 1. "undo" sometimes miss any commands.. 2. sometimes stops working express pack, it means commands form express.. and then runs again.. after some time again to stop work.. 3. mstretch, very usefull command, why it does't work normally? Command: ss Specify an option [CP/C] <Crossing first point>: Specify other corner: Crossing first point Specify an option [Remove objects] <Base point>:r Select object needs no stretch. Select object needs no stretch. Specify base point: Specify second base point: ..and removed objects are stretch, although they shouldn't..

zw_admin — 2009-09-21 18:16:32

Hello liviu_petreus, Sorry for any inconvenience! could you do me a favour and describe it in detail, then maybe we together can find a solution. here i want to know: 1> detail operation detail before the undo problem happen 2> is this happen to every drawing or to some specific drawing? if it only happen to specific drawing, could you please send it to us(tech@zwcad.com ), we make sure we will keep it confidential 3> is there any prompt or warning when it happen? Looking forward to you reply! Best Regards, Amanda

zw_admin — 2009-09-18 22:06:33

The undo command not work properly. I lose my drawing because this command not work correctly. I have ZWCAD 2009i professional.