CAD software discussion forum > CAD > zwcad draw order problem, draworder command not work properly

zwcad draw order problem, draworder command not work properly

Rank: 1

luca

Newbie

posts: 0

Registered: 2010-4-22

Message 1 of 11

 zwcad draw order problem, draworder command not work properly
14-05-2008 05:19 . am | View his/her posts only
hallo,

I noticed that when you do draworder (for example if you send back a solid hatch in order to see lines inside the hatched area) the program zwcad does it properly but the order last only untill you use other commands. once you use other commands or you work a little in the drawing the entities you sent back return over the lines you wanted to be in front. that's annoying expecially when you get to print. You have to resettle everything everytime.

spritz2008-05-15 10:30:05

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 2 of 11

14-05-2008 10:11 . pm | View his/her posts only
hello, Spritz. Please check on whether you are using our latest version, VERNUM = "2008.04.15(5576)". If you use our former version, please download the newest package from our website to test. As the order of the solid hatch and lines perform well in our pc after adjusting. Smile

Rank: 1

maker

Newbie

posts: 0

Registered: 2008-8-15

Message 3 of 11

14-05-2008 11:34 . pm | View his/her posts only
Hello Rab,
Not entirely related but -- is there any way to select (cycle between) overlapping objects? Like in autocad 2007 and later, you press SHIFT+ TAB to cycle between the objects.
Thanks


Rank: 1

maker

Newbie

posts: 0

Registered: 2008-8-15

Message 4 of 11

14-05-2008 11:34 . pm | View his/her posts only
Hello Rab,
Not entirely related but -- is there any way to select (cycle between) overlapping objects? Like in autocad 2007 and later, you press SHIFT+ SPACEBAR to cycle between the objects.
Thanks


Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 5 of 11

15-05-2008 05:23 . am | View his/her posts only
Hello, Maker. They are some new function. I have submitted them to our R&D dept and they will consider whether and when to add it in our future versionSmile

Rank: 1

maker

Newbie

posts: 0

Registered: 2008-8-15

Message 6 of 11

15-05-2008 10:08 . am | View his/her posts only

Thank you Rab. Till then, I suppose we use Draworder; but it's a bit awkward to use when there are too many objects overlapping.
maker2008-05-15 10:10:54

Rank: 1

luca

Newbie

posts: 0

Registered: 2010-4-22

Message 7 of 11

15-05-2008 10:50 . am | View his/her posts only



In this site I cold find as latest patch for 2008 professional:

Patch release for ZWCAD2008 Professional (Publish Date:Feb 22, 2008) that means VERNUM = "2008.02.22(4889)"

where do I dowload
VERNUM = "2008.04.15(5576)" ?????????????????????????


spritz2008-05-15 10:53:14

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 8 of 11

15-05-2008 11:46 . pm | View his/her posts only
hello, Spritz. The VERNUM = "2008.04.15(5576)" is for ZWCAD2008i version. So you shall download the ZWCAD2008i package from our website. And thats our latest version.

Rank: 1

luca

Newbie

posts: 0

Registered: 2010-4-22

Message 9 of 11

19-05-2008 05:44 . am | View his/her posts only
hallo,

I installed the 2008i pro version but I'm not able to locate the 2008.04.15(5576) patch in the website. Could you please give a link for it?

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 10 of 11

19-05-2008 01:16 . pm | View his/her posts only
2008i version has no a patch yet. If you installed it then it has _vernum 2008.04.15(5576) already.

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 11 of 11

21-05-2008 03:43 . am | View his/her posts only


Dear all. Yes, We haven't released a new patch for 2008i until now and vernum = 2008.04.15(5576) is for our latest version. You can download the package from following links:


For ZWCAD 2008i Standard Version: (vernum=2008.04.15(5576))
Download1: http://www.zwcad.org/download/08iexeOfficialInstaller/zwcad2008iEng.exe
Download2: http://zwcad.org.ip01-web23.net/download/08iexeOfficialInstaller/zwcad2008iEng.exe
Download3: http://down.zwcad.com/en/08iexeOfficialInstaller/zwcad2008ieng.exe

For ZWCAD 2008i Professional Version (vernum=2008.04.15(5576))
Download1: http://www.zwcad.org/download/08iexeOfficialInstaller/zwcad2008iEngp.exe
Download2: http://zwcad.org.ip01-web23.net/download/08iexeOfficialInstaller/zwcad2008iEngp.exe
Download3: http://down.zwcad.com/en/08iexeOfficialInstaller/zwcad2008iEngp.exe
See also