CAD software discussion forum > CAD > ZWCAD 2009 Problems

ZWCAD 2009 Problems

Rank: 1

_mac

Newbie

posts: 0

Registered: 2010-8-17

Message 1 of 11

04-02-2009 10:57 . am | View his/her posts only


I've just gotten back to using ZWCAD 2009 and i have observed the following:


1. The command OOPS does not work.

2. I cannot also assign the command alias TR to trim, it always executes TRACE instead.

3. Also the Keyboard macro for F7 does not seem to work when assign as _NOD while other Functions keys works well. This is also the case with ZWCAD 2008i.

I hope these can be resolve soon.

Regards,

Mac_mac2009-02-04 13:17:41

Rank: 1

_mac

Newbie

posts: 0

Registered: 2010-8-17

Message 2 of 11

04-02-2009 01:16 . pm | View his/her posts only


I'm not able use the P option (for previous selection) in selecting objects following TRIM and EXTEND commands.


Regards,

Mac

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 3 of 11

 ZWCAD 2009 Problems
04-02-2009 02:16 . pm | View his/her posts only
Hi Mac. Thank you for your test. We recommend that you can download and evaluate the lateset version of ZWCAD from our website, the problems which you mentioned have been solved. Allen2009-02-04 14:17:27

Rank: 1

_mac

Newbie

posts: 0

Registered: 2010-8-17

Message 4 of 11

04-02-2009 02:38 . pm | View his/her posts only


I'm using VERNUM 2008.01.23(9080), please verify if this is the latest release.

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 5 of 11

 ZWCAD 2009 Problems
04-02-2009 02:16 . pm | View his/her posts only
Hi Mac. VERNUM 2009.01.23 (9080) is the latest version. But the problem that you mentioned didn't recur in my test. If you still encounter the problems, please send an email to our technical support team team@zwcad.com. Any recoder and shortcut is appreciated. Thanks. Allen2009-02-04 15:02:06

Rank: 1

_mac

Newbie

posts: 0

Registered: 2010-8-17

Message 6 of 11

04-02-2009 03:10 . pm | View his/her posts only
Ok. I'l do that. Thanks.

Rank: 1

_mac

Newbie

posts: 0

Registered: 2010-8-17

Message 7 of 11

04-02-2009 03:30 . pm | View his/her posts only


The alias for TRIM (TR) is now working. And for F7 i went back to the customize window and edited the command into NODE instead of _nod, and it is now working. BTW, all other osnap keyboard macro commands are in _xxx format (_int, _end, etc.) and not needing to be entered in whole.

Rank: 1

_mac

Newbie

posts: 0

Registered: 2010-8-17

Message 8 of 11

11-02-2009 11:16 . am | View his/her posts only
[QUOTE=_mac]


I've just gotten back to using ZWCAD 2009 and i have observed the following:


1. The command OOPS does not work.


As it turns out it OOPS is working fine, it was my mistake of not including this in my alias commands. I was so used to ACAD that OOPS is a command, while in ZWCAD OOPS is an alias for UNDELETE.

Regards,

Mac_mac2009-02-11 11:17:07

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 9 of 11

 ZWCAD 2009 Problems
04-02-2009 02:16 . pm | View his/her posts only
Dear Mac. Thank you for your detail test, your satisfaction and support will encourage us to keep going day by day.

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 10 of 11

16-02-2009 06:01 . pm | View his/her posts only
Hello,

i'm a CAD Operator and i have only been using ZWCAD for more than just a week now, I have been using ACAD on my previous projects and now im having troubles in croosing platform with these two programs, like for instance, hatches dimensions and texts move out of place when UCS has been rotated. Could you please assist me on this. Hope to hear from you...

Rank: 1

OldForumPost

Newbie

posts: 0

Registered: 2012-1-14

Message 11 of 11

 ZWCAD 2009 Problems
04-02-2009 02:16 . pm | View his/her posts only
Dear Reina Reyes. Thank you for your message. Regarding the problems which you encountered, we recommend that you can send the problem drawing file to us at your convenience. It's helpful to analyze and research these problems. Our email address is tech@zwcad.com, looking forward to your email. Thanks Allen2009-02-17 08:50:58
See also