ZWSOFT User Community > ZWSOFT Forums - Find. Share. Connect. > ZW3D CAD/CAM > CL-DATA: ARCMOV DEG<=120. how to control this parameter?
CL-DATA: ARCMOV DEG<=120. how to control this parameter?
CL-DATA: ARCMOV DEG<=120. how to control this parameter?
28-06-2012 07:05 . pm | View his/her posts only
For example:path:
path
CL-DATA:
TLAXIS/0.00000,0.00000,1.00000
RAPID
GOTO/-84.48009,-117.83089,50.00000
RAPID
GOTO/-84.48009,-117.83089,2.00000
FEDRAT/MMPM,800.00000
SPINDL/RPM,8000,CLW
GOTO/-84.48009,-117.83089,-0.10000
CUTCOM/LEFT,XYZ,OSETNO,0
GOTO/-84.98009,-117.83089,-0.10000
FEDRAT/MMPM,1000.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-79.98009,-126.49114,-0.10000,60.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-64.98009,-117.83089,-0.10000,120.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-79.98009,-109.17063,-0.10000,120.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-84.98009,-117.83089,-0.10000,60.00000
FEDRAT/MMPM,1000.00000
CUTCOM/OFF
GOTO/-84.48009,-117.83089,-0.10000
RAPID
GOTO/-84.48009,-117.83089,50.00000
how to control the this parameter without the postprocessor?
Is it possible?
how to get this CL-DATA:
TLAXIS/0.00000,0.00000,1.00000
RAPID
GOTO/-84.48009,-117.83089,50.00000
RAPID
GOTO/-84.48009,-117.83089,2.00000
FEDRAT/MMPM,800.00000
SPINDL/RPM,8000,CLW
GOTO/-84.48009,-117.83089,-0.10000
CUTCOM/LEFT,XYZ,OSETNO,0
GOTO/-84.98009,-117.83089,-0.10000
FEDRAT/MMPM,1000.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-84.98009,-117.83089,-0.10000,360.00000
FEDRAT/MMPM,1000.00000
CUTCOM/OFF
GOTO/-84.48009,-117.83089,-0.10000
RAPID
GOTO/-84.48009,-117.83089,50.00000
path
CL-DATA:
TLAXIS/0.00000,0.00000,1.00000
RAPID
GOTO/-84.48009,-117.83089,50.00000
RAPID
GOTO/-84.48009,-117.83089,2.00000
FEDRAT/MMPM,800.00000
SPINDL/RPM,8000,CLW
GOTO/-84.48009,-117.83089,-0.10000
CUTCOM/LEFT,XYZ,OSETNO,0
GOTO/-84.98009,-117.83089,-0.10000
FEDRAT/MMPM,1000.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-79.98009,-126.49114,-0.10000,60.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-64.98009,-117.83089,-0.10000,120.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-79.98009,-109.17063,-0.10000,120.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-84.98009,-117.83089,-0.10000,60.00000
FEDRAT/MMPM,1000.00000
CUTCOM/OFF
GOTO/-84.48009,-117.83089,-0.10000
RAPID
GOTO/-84.48009,-117.83089,50.00000
how to control the this parameter without the postprocessor?
Is it possible?
how to get this CL-DATA:
TLAXIS/0.00000,0.00000,1.00000
RAPID
GOTO/-84.48009,-117.83089,50.00000
RAPID
GOTO/-84.48009,-117.83089,2.00000
FEDRAT/MMPM,800.00000
SPINDL/RPM,8000,CLW
GOTO/-84.48009,-117.83089,-0.10000
CUTCOM/LEFT,XYZ,OSETNO,0
GOTO/-84.98009,-117.83089,-0.10000
FEDRAT/MMPM,1000.00000
ARCDAT/-74.98009,-117.83089,-0.10000,0.00000,0.00000,1.00000,10.00000
ARCMOV/CCLW,-84.98009,-117.83089,-0.10000,360.00000
FEDRAT/MMPM,1000.00000
CUTCOM/OFF
GOTO/-84.48009,-117.83089,-0.10000
RAPID
GOTO/-84.48009,-117.83089,50.00000
CL-DATA: ARCMOV DEG<=120. how to control this parameter?
29-06-2012 02:54 . pm | View his/her posts only
Hello Heckfy,
Do you mean ZW3D break the circle to arcs?
I think most of the CAM software separate the circle to arcs to make it clear in NC Code.
So, we separate the circle to arcs in *.cl file, and it is would be easy for the post process to translate to NC code.
Best regards,
Steven
Do you mean ZW3D break the circle to arcs?
I think most of the CAM software separate the circle to arcs to make it clear in NC Code.
So, we separate the circle to arcs in *.cl file, and it is would be easy for the post process to translate to NC code.
Best regards,
Steven
