ZWSOFT User Community > software discussion forum > 3D CAD/CAM > What is New in ZW3D 2013—Smart Sketch with constraint conflict prompts
What is New in ZW3D 2013—Smart Sketch with constraint conflict prompts
What is New in ZW3D 2013—Smart Sketch with constraint conflict prompts
01-02-2013 01:50 . pm | View his/her posts only
1. Two different methods to prompt the conflicting constraint. Toggle the control method by the option in the configuration.
a) Unpick this option
The Alert message will pop up when the added constraint is not suitable.
b) Pick this option
The sketch will display in the color when the constrints are conflicting.
If the conflicts hasn't been solved, the sketch feature displayes in the red color in the history manager after existing the skecth environment. Clear hint.
2. Another important point ---Fast to find out the problem and fix it.
Constraint status -- Get the list of unsolved constraints and demension and fix them
Solution : constraint--Delete
diemnsion --Delete or toggle it into the reference dimension
a) Unpick this option
The Alert message will pop up when the added constraint is not suitable.
b) Pick this option
The sketch will display in the color when the constrints are conflicting.
If the conflicts hasn't been solved, the sketch feature displayes in the red color in the history manager after existing the skecth environment. Clear hint.
2. Another important point ---Fast to find out the problem and fix it.
Constraint status -- Get the list of unsolved constraints and demension and fix them
Solution : constraint--Delete
diemnsion --Delete or toggle it into the reference dimension
