Home > Product > Partner Product > Civil
23 application(s) found


    • GA Przepustowość is software for junction performance analysis according to polish  instructions.

    • GA Sygnalizacja- traffic signal design software, enables engineers to produce traffic signal design drawings, measure and calculate traffic signal phase intergreens, prepare phase timing diagrams and prepare analysis of junction performance.

    • GA Znaki includes a comprehensive library of traffic signs, allows you to map out road markings and design traffic management. The software is offering a whole range tools and generators allowing user to create road signs according to polish standards for vertical, horizontal signs and traffic safety devices.

    • Application is dedicated for road engineers. It helps to design roads by support in: Inserting road signs (database of signs) Automation of drawing horizontal signs (lines, arrows, pedestrian crossing) Application contains module to designing own signs Creation reports from inserted elements Automation of drawing islands. Drawing trajectory of moving car

    • CivilCAD 2014 Solution Suite, the ultimate plan and design tools for civil engineering professionals, offers roads planning and design, upper and underground infrastructure design and pipes layout tools, intelligent and sensible earthworks calculations, and cross platforms surveying data handling capabilities.

    • MapWorks is Civil/Survey Mapping & GIS software for ZWCAD.  It is a modular system covering the major areas of alignments, design, parcels, points, sections, surfaces, and more.

    • CadTools (ToolBox) is developed for Civil Engineers using ZWCAD+ 2014 and above

    • Civil design suite software CECS software package is designed to support, with its program command groups, virtually all phases of civil design process. CECS 2.0 - Civil Engineering CAD Solution

    • Introduction The Professional Version is designed to assist users in all the phases of carrying out a Surveying project. Its main users include the public administration, construction companies, engineering firms, architects, town planners, companies dedicated to earthworks, quarries, mining firms, environmental companies, etc., as well as independent professionals. Surveying points The program begins with the coordinates, which are obtained from any total station or GPS, by converting files from data collectors or from other application through a powerful format manager. It has a CAD-independent point viewer, with view controls, 3D orbit… Points are intelligent CAD objects, so that they can be deleted, moved, changed to another layer, by using standard CAD commands, or can be blocks with attributes, making the drawing fully compatible with other CAD applications. In addition, any kind of editing operation can be executed, for instance interpolating, changing heights, sorting by levels, filtering, assigning codes, labeling coordinates, grouping points, changing their visibility, and so on. Coordinates can be changed by using an editor similar to an electronic sheet. Selection can be made by number, level, height, group, code or graphically. Each point can be associated to a document, drawing or photograph via a hyperlink. Points can have alphanumeric names and it is possible to display points with different shapes and colors within the same drawing. ...

    • RD12 est un logiciel modulaire de topographie, allant du carnet au calcul de routes, disposant de nombreux assistants et d'un guide utilisateur avancé pour la personnalisation et l'ajout de commandes personnelles. Il est possible d'ajouter des fonctionnalités en téléchargeant des bibliothèques gratuites.

    • Point Clouds It is possible to manage millions of points imported from files in common formats: generic scanner files and LIDAR standard format files. The application allows the users to import several point clouds separately or import them to a single file, with all information stored in each point.   Points Visualization Visualization can be set up in orthographic or perspective mode, and it has tools for zooming, panning and changing viewpoints , etc.   Points can be viewed in natural colour, intensity or category. The amount percentage of points to be displayed and the pixel size of the points can be controlled. The point cloud can also be viewed in stereoscopic mode with active and passive systems.   On opening a drawing with TcpMDT, the users can control the visibility of every layer.   Profiles The quick profile option enables the users to get an immediate view on the profile which is on a reference plane and generated from a polyline drawn on the screen.   By executing the command, MDT presents profile by generating an image consisting of the projection of  points selected within a distance, with real coordinates and size,  which allows the user to draw it in the viewer or on the CAD.   More accurate results can be obtained by drawing alignments or importing them from TcpMDT.  Profiles and cross sections are created by alignments and can be drawn manually or directly on the CAD.   Digital Terrain Model The software features several options for selecting the points to be processed. Thus, points can be filtered in accordance with their position or category, and the boundary can be delimited by a rectangle or 3D box.   Once the points are selected,  the digital model  can be created. The result can be viewed on the point cloud and also be stored as a surface or mesh.   

    • Template Definition Templates can be defined by parameters or selecting a polyline in AutoCAD. The distances from the center of template to alignment, roadbed thickness and superelevation criteria must be given. It is possible to apply different templates to intervals of alignment and interpolate their dimensions.   Cross section calculation and editing The measured cross-sections can be computed from points, giving the Station interval, minimum number of points, tolerances, etc. Also with the editor are included tools for removing, adding or moving points before drawing   Cross-section drawing It is possible to draw cross-sections in AutoCAD, in individual mode or by sheets. There are options to label differences between project and measured cross-sections as well as station, heights, areas, etc.   Tunnel Drawing It is possible to create a 3D view of measured cross-sections as a wireline drawing. There are options to draw measured and project cross-sections, the alignment in 3D, longitudinal lines, etc.   Volume Calculation The program computes volumes of infra and over-excavation by comparing project and measured cross-sections. Reports can be generated and sent to printer, ASCII or HTML files and exported to Word or Excel.

    • With ARQ-Roof you will create and design any type of roofing in 3D starting with only one single polyline (the roof contour).

    • CAD Translate is a program which gives you the possibility of translating every text included in your CAD drawings into any language.

    • CivilCAD, created by ARQCOM, is designed to automate and simplify civil engineering and land surveying tasks within ZWCAD+ 2012. With over 20, 000 users since its introduction in 1996, CivilCAD is the standard for government agencies, construction companies and universities in Latin America. With CivilCAD, you can quickly create profiles, cross sections, contour lines, land subdivision, cut and fill volume calculations, and over 100 additional useful routines. You can complement this software with additional modules such as Water and Wastewater networks, Road Design, Mass Haul Data Export, Pluvial Wastewater networks and the new import/export data Interface for Google Earth™.

    • ESurvey KML converts your CAD data to KML and publishes it in Google Earth. Google Earth is a geo-browser which represents the Earth as a three-dimensional globe. Converting data available in Google earth in the form of KML File to 2 Dimensional CAD drawing and Vice Versa is possible with ‘ESurvey KML’. Features offered in ESurvey KML Export CAD Drawing to KML File (Point (Place Marker), Text, Line, Pline (Path), Polygon) Import KML File data as CAD Drawing (Point (Place Maker), Text, Line, Pline (Path), Polygon) Convert UTM Coordinate to Lat Long Convert Lat Long Coordinate to UTM Find Lat long of a Point with in your CAD Editor Benefit of choosing ESurvey KML Present your Drawing data on Google Earth and Impress your Customer Cross Check Survey Data with Google Earth Data to ensure accuracy Import Available Data from KML File and avoid retracing Publish (Export) your CAD Data to Google Earth KML File 2 Dimensional Drawings created in CAD (AutoCAD / BricsCAD / GstrarCAD / ZWCAD) including entities such as point, text, line, Poly line, polygon, etc. can be published (exported) to Google Earth in the form of KML File using ESurvey KML. Import Places information from Google Earth KML File into your CAD Package (AutoCAD / BricsCAD / GstrarCAD / ZWCAD) Data stored as place markers, Path or Polygon in Google Earth KML File can be imported to CAD Package using ESurvey KML. Convert UTM Coordinate to Latitude Longitude ESurvey KML allows you to convert UTM coordinate to respective Latitude Longitude. Single point conversion can be done with specific entry. UTM Converter converts given Easting Northing to Latitude / Longitude. This utility supports several map datum such as NAD83/WGS84, GRS 80, WGS72, Australian 1965, Krasovsky 1940, Clarke 1866, Bessel 1841 and Everest 1830. When there are more points to be converted, with Bulk option you can convert series of UTM Coordinates to Latitude Longitude at one shot via excel file using ESurvey KML. Convert Lat Long Coordinate to UTM ESurvey KML allows you to convert Latitude Longitude to respective UTM coordinate. Single point conversion can be done with specific entry. When there are more points to be converted, with Bulk option you can convert series of Latitude Longitude Coordinates to UTM at one shot via excel file using ESurvey KML. Find Lat long of a Point within your CAD Editor (AutoCAD / BricsCAD / GStrarCAD / ZWCAD) When the CAD Drawing is represented with Correct UTM Coordinates, using FLL Command of ESurvey KML we can find the Latitude longitude of any point in the drawing with Single Click. Before Running the Program we need to set the Map Datum (Ellipsoid), Hemisphere and Zone. After Setting the Datum, you can locate the Lat Long Point using ‘FLL’ Command

    •  E Survey Lisps ZWCAD/AutoCAD users have their own set of lisps for automation, which save a lot of time. But searching for a suitable lisp from this set of lisps is difficult. Also, most of these lisps are freely available on the Internet or custom made and hence are not properly documented. To address these issues, ‘E Survey Lisps’ has been developed. ‘E Survey Lisps’ is a collection of tailor-made lisp routines developed exclusively for AutoCAD users working on Survey drawings.   Features: Access all Survey related macros from single elegantly defined menu Macros classified into 13 categories ranging from text to interpolation   Benefits: Saves considerable time while working with Survey Drawings. Increase the output drawing quality and productivity to a great extent.



    • Survey and Cogo: Set points, traverse, sideshot, inverse, intersect, import & export points, import linework from point file, design lots by area. Label lines, curves and areas. DTM: Create a Triangulated Irregular Network. Use fault lines to control model. Create contours at user defined intervals. Calculate volumes. Unlimited number of surfaces. Create fully annotated profiles. Road: Cut profiles and cross sections from a digital terrain model. Create templates and proposed profiles. Calculate cross section volumes. Create fully annotated profiles and cross sections.
PLEASE NOTE: These applications are created by third party providers. Downloading, installation, licensing and support are under the publisher's responsibility only.
drafting software | cad download | 3d cad standards | 3D models free download | Machinery 3D models | 3d automotive modeling software
2013 ZWCAD Software Co., Ltd. All rights reserved. | About ZWSOFT | Privacy Policy | Terms and Conditions | Contact us | Site Map