Hole Cutting - 8. Counterbore Hole Operation Oct-08-2013 | 11:38 |
Use the counterbore operation to spot-face, making room for the heads of bolts or screws, or to enlarge holes.
Hole Cutting - 7. Fine Bore Hole Operation Oct-08-2013 | 11:39 |
With a fine bore operation, the boring bar enters the hole off-center, centers and bores from the bottom of the hole upward, avoiding drag marks along sides of the hole.
Hole Cutting - 6. Bore Hole Operation Oct-08-2013 | 11:40 |
Use the bore operation to enlarge, finish and accurately locate holes.
Hole Cutting - 5. Ream Hole Operation Oct-08-2013 | 11:42 |
Hole Cutting - 4. Chip break Hole Operation Oct-08-2013 | 11:44 |
With a chip-break operation, the drill withdraws a specified distance after advancing into the hole to prevent the binding of chips.
Hole Cutting - 3. Peck drill Hole Operation Oct-08-2013 | 11:45 |
The peck-drill operation is a deep drilling method. The drill withdraws to the approach plane after advancing a specified distance into the hole, facilitating chip removal.
Hole Cutting - 2. Drill Hole Operation Oct-08-2013 | 11:47 |
The drill operation is the primary hole making operation. It is used to drill basic holes.
Hole Cutting - 1. Center Hole Operation Oct-08-2013 | 11:49 |
The center hole operation is used to provide starting holes for other drilling operations.
ZW3D - 3D Modeling, Mold Design & Machining Jan-24-2013 | 15:49 |
ZW3D is cost-effective CAD/CAM software for 3D modeling, mold design, and machining, which takes engineers from concept to finished product in one easy-to-use, single collaborative environment.
How ZW3D relieves 2D CAD users from design work loads? Jan-24-2013 | 14:47 |
How ZW3D relieves 2D CAD users from design work loads.
1. Quickly Convert to 3D
2. Easy Modification
3. Vividly Show Ideas
4. Efficient Documentation
Submit your stories
CAD library Hot
Licensing & upgrade
3D CAD/CAM forumHot
Campaign & event
Get a quote