Use the Helical Cut operation to machine male and female threads. Cutting parameters include Pitch, Direction, Cut Order, Tolerance, Depth Thickness, Radial Thickness, Start Angle, Number of Passes and Step Distance.
The operation can be used to face off the top stock materials or all planar faces. Part (or Surfaces), stock, or 2d CAM features like faces, pockets, steps can be machined by this operation and the Flat End Mills are recommended.
The part nesting operation can be used to arrange parts on a plate of material to maximize the number of parts that will fit. Nester profile feature can be machined by this operation and the Flame tool is recommended.
SmoothFlow is a HSM cycle that tries to keep the tool uniformly engaged in material and retract as few times as possible. There are two flavors: a unidirectional (climb, conventional) version and a zigzag one.
Like the high speed offset 2D cut operation, the rough offset 2D cut is used for 2D area clearance of explicitly defined rough stock. The tool path is first calculated and then projected onto the CAM component geometry.