The 5 axis Swarf Cut operation uses Control surfaces (see above) to calculate the tool path. The tool axis is controlled by drive surfaces with which the side of the tool maintains contact.
ZW3D Seamless Collaboration with ZWCAD Jul-30-2014 | 16:39 |
"Open in ZWCAD" function allows designers to collaborate seamlessly with ZWCAD, a mainstream DWG CAD product, which provides advanced 2D CAD drawing functions for modeling.
ZW3D Wave pattern tool path in Z Level Operation Jul-30-2014 | 16:35 |
Support to create tool path of wave pattern in Z level operation, it could be used to polishing stones. Now we can set three cycle types including SIN, Circle, trapezoid and cycle length, amplitude, also can set offset of each level.
Start Point for Drilling on 2D Drawing Jul-30-2014 | 16:31 |
When engineers pick points or circles as hole features, they can set different drilling starting planes easily to machine on 2D drawings.
They can set their start point which will be beneficial to generating the tool path from a 2D sketch.
Flexible Morphing Features Jul-30-2013 | 16:43 |
3-Check for undercut regions Jan-07-2013 | 16:36 |
2-slinked model and correctly located for the mold Jan-07-2013 | 16:37 |