Message 1 of 8
Have been using various versions of Acad since 1994.
I received a copy (CD) of the trail copy from the local ZWCAD distributor yesterday.
Having installed the programme decided to test it.
The following problems were experienced:
1) Dimension text size could not be changed either in format mode or by modify properties.
2) My drawing comprised of two circles forming a ring which needed to be divided into 26 segments.
When I attempted to polar array the line joining the circles which I did according to normal practice, I found that the selected 360 degree array ended up as 270 degrees.
I changed the angle to fill from by adding 90 degrees 90 degrees i.e. 360 + 90 = 450 degrees managed to achieve my result???
3) I also discovered that the zoom-in function was limited and unable to zoom past a certain limit.
4) The format dimension activity is also confusing in that it refuses to be edited without indication some obscure message.
Are these problems current or is the CD copy a beta version?
The problems were experienced within 30 minutes of using ZWCAD. So I not aware of any other glitches.
Although I am extremely interested in acquiring a copy of ZWCAD I would be hesitant in do so at the moment..
I would be grateful if someone could could assist me?
My only alternative is to resort purchasing very costly AutoCad which I am very reluctant to do.
Message 2 of 8
Message 3 of 8
Message 4 of 8
The vernum is "2009.07.30 (11052)" (read only)
I look forward to receiving your reply.
As I have not received a reply from you I have decided to send you another message.
I have discussed my problems with the distributor who has advised me that the trial software is for trial purposes only and assures me that the problems are due to configuration and that this would be sorted out once I have made my purchase.
Having now had a few days to play around with the program, I must admit that Iam very impressed with the remainder of the content and the overall performance of the software.
I look forward to making my purchase in the the new year as things are now quietening down prior to the festive season.
Many thanks also for your encouraging words regarding my new venture.
I plan to spend the remainder of this year preparing for 2001.
Message 5 of 8
Message 6 of 8
I has happy to receive your reply.
I hope that you enjoyed your break.
Became a bit concerned that I needed to look somewhere else for a reply and had failed to find anything.
The forum schedule indicates that I have received 4 replies, whereas this is your second reply so I don't know who the others were from and how to retrieve them.
All going well I will be aquireing ZWCAD in the new year.
I wish you a happy and joyful Christmas and a proporous new year.
Message 7 of 8
Message 8 of 8
It has been some time since our last communication.
To keep you up to date, I managed to get a trial copy of ZWCAD 2010 and have been using it just over 3 weeks.
I am completely satisfied with it and plan to purchase the software in a few weeks time.
There are many AutoCad features missing, but then I consider ZWCAD to be a separate product which is developing at a fast rate and at the same time AutoCad compatible without having to DXF as is the case with all other cad products.
This is really a plus factor as most of my clients use AutoCad and can therefore open my drawings directly.
- how to make a hole in autocad
- how to open microstation drawing in autocad
- any dwf to dwg converter full
- autocad .bak viewer
- how to find backup files in autocad
- How to install ZW3D
- what is .dwg
- how to find area in autocad
- zwcad 2011 crack
- how to move objects in autocad
- autocad area calculation
- design cad software
- cadtools forum
- 3d cad cam
- set autosave in autocad