CAD/CAM discussion forum > Other CAD/CAM Technology > Insert block attribute in autocad

Insert block attribute in autocad

    
  Subscribe Topic

Rank: 3Rank: 3

Yusuf

Junior Engineer

posts: 188

Registered: 2012-4-27

Message 1 of 1

 Insert block attribute in autocad
14-04-2014 02:30 . pm   |   View his/her posts only
Insert block attribute in autocad
Command format
Command line: Insert(I)
Menu:[Draw]>[Block(B)]>[Make(M)]
Toolbar:[Draw]>[Insert Block]
The operation of inserting the attribute block is same as the way to insert the block. The inserted attribute block is a single entity. You must define the insertion point, scale and rotation angle when you insert the attribute block. The insertion point is the specific point when you define the block. If you insert the graph as the attribute block, the program will consider the defined insertion point as the insertion point of the attribute block. The call command of attribute block is same as ordinary block’s, while the prompts are more.
Steps
Insert the QC attribute block we created in last section into the garage. As graph 10-17 shows.

  Command: Insert Execute Insert command
  Select the QC block in the “insert” dialog box
  Enter or select the name of the block
  Multi block/ “insertion point of the block”: pick a base point in the drawing area
   Specify the base point for the block to insert
  Circle(C)/XYZ/X scale factor<1.00000> Enter and insert the default value
 Y scale factor<1.000000>; Enter and insert the default value
 Rotation angle;0 Specify the rotation angle of insert block
 Enter the car’s brand:BMW Enter the attribute value of the brand
 Enter the car’s mode:BM598 Enter the attribute value of the mode
 Check the attribute value
 Enter the car’s brand:BMW Check the attribute value
  Enter the car’s mode:BM598
  Correct input and Enter to end 3d design software
cam software
See also
X