Message 1 of 5
Take an example of modelling a thread on a bottle neck....
I create a sketch.
I reference in the neck edges so I have a reference curve in the sketch.
I draw a thread profile (say a buttress type) with one line drawn over the reference curve (ie the curve lies on the neck outer surface)
I now want to edit the line that is on the reference curve.....I click on it.....and the reference curve selects NOT the line.
You cannot fence select just the line without VX picking up both the reference and the line (or can you?).
I could blank the reference curve then select the line, but why?
What I can't understand is that in a sketch it is good practise to start by referencing in the edges you need, then draw the profile on top of that. So why does VX appear to put the drawn entities UNDER the referenced curves?
What strategies have others got for dealing with this?
Message 2 of 5
Message 3 of 5
VX isn't really drawing a line on top of or underneath another line (reference or not). In Sketcher Space they are occupying the same Z level (zero). Typically, you should not need to draw a line on top of the reference line anyway - just draw the rest of the shape, then use Trace Profile to pick the elements that the modeller should "see", including a portion of the reference line as in your example.
Message 4 of 5
Trace Profile is truly BRILLIANT.
A TIP: If you think you might need to make changes to the position or size of the traced profile later, make sure you can do all that via dimensions.
IF you don't you'll have to delete the trace, modify the profile, and re trace which is really a new profile At least it's very easy.
However, features down the track, that use faces created from the new trace will now have different ID's so will fail to regen.
No big deal but to be aware of in the first case.
You cannot blank a trace which is a pity. Sometime the trace gets in the way and an Alt pick does not select the underlying line.
The other very useful thing that isn't so obvious, (training might help!) is you can toggle a reference line so that it is now an active part of the sketch and will extrude etc.
Message 5 of 5
- 3D CAD/CAM Design Software
- How to open an autocad file
- autocad default toolbar
- buy solidworks 2011
- advanced mechanical designing softwares
- mechanical design software free download
- wire rope design
- how to draw a hexagon in autocad
- reset autocad configuration
- 3d ds
- autosave autocad
- autocad turn off the smart command
- cad discussion
- dwg software
- how to convert autocad bak file to dwg