Message 1 of 16
Everything is outline regardless of it's origin font (VX or TTF)
Is there a reason for this?
Are there any changes planned?
Is anyone else interested in having more control over text appearance in drawings?
Message 2 of 16
Message 3 of 16
Message 4 of 16
I don't know if Mike mentioned the current solution (?) to you. I had the same issue I discussed with him a few months back. He told me the only way to control dimesnion text attributes was through plotting. He had me put the dimensions in a different color. When plotting, go into attributes and change them for that particular color. It works, but it's certainly not a good solution.
Message 5 of 16
Message 6 of 16
Mike the 'solution' is called a 'work around'.
It actually makes outline fonts look odd. Bit for Simplex fonts, setting the line thickness to the ~3rd line does give the increased boldness that is no longer 'spider' like. Works OK for me.
So for folks who haven't gotten their heads around PLOTTING from VX I offer the following ultra simple explanation and tips.
Plotting is actually a computed output rather than an image of the drawing.
Plotting does not do Shaded or Fast Hidden Views or any images.
The advanced controls in plotting allow for setting the paper size, colour line type, thickness, color or BW output etc etc.
Now the trick is to set up plot definitions and customize these as you go.
So for say A3 plotting(I always print to Primo_pdf so this is the printer included as part of the plot definition) in the Setup file field, type in 'A3_Horz_yourname' (definitions are in the Device tab.)
Save the setup file then start setting the options you want in the various tabs. Do simple test drawing prints until you have the right output. Then save the definition/setup to keep these for later.
You can have multiple setups. I have one for each paper size. To re use the definition/setup, go to the Device tab then pick the SetupFile you want from the Available drop down list. Then choose Load Setup file.
Remember to visit the Plot Tab and turn off the Scale to Fit option which annoyingly resets each Setup Load.(IMO it should not!)
OK so that 's all sorted.
Now you need to find where these plot files are stored so you can copy them from one version to another.
The exist in the User xx.xx(version) folder under plotters. I keep a CAD Setup Data folder where I keep a copy of the most current plot files, bundles, etc before installing a new version. This means I have convenient way of quickly getting all my customised settings (well most at least) back up an running quickly.
The text option discussed here is to set up the Dimension Bundle to have the dimension text in a unique color(I chose Grey with blue lines). Then in the Plot Setup under Colour Tab, set the Grey to Print Solid/ a particular line thickness and have this contained in the setup for always. The combination of settings allows for the good looking output related to the paper size assuming you are consistent in using Attrib. bundles and Setups.The little issue is that printing via a PDF printer may not always give you the line thickness or type control you might expect. But with experimentation you can get it looking good.
VX does allow you to manage all these things professionally but it takes setting up. The most important part is being able to move these to the next version quickly.
Message 7 of 16
Concerning Shaded Views and Images, they do 'plot' (does not work in v14.40, fixed in v14.50), in which case the output is raster, not vector (I know, I know ). I have not seen ZWCAD2D in action but given that it rivals AutoCad 2D, I'm sure there will be a lot of niceties for VX Users in the future.
Message 8 of 16
Its middle of the day on the opposite side of world here and you are posting!!!
I have 14.5Beta and the Scale to Fit annoyance has been fixed too.
Re the plot shaded. Yeap the raster strikes again! At least it does something....
Curiously I have gotten fond of fully editable vector plots now I am weaned of GL drawings and shaded as per the 'others' .
Message 9 of 16
Thanks again Paul for the helpful explanateion
Message 10 of 16
Message 11 of 16
Message 12 of 16
attached is a PDF version of a plot output from VX.
I have modified some attributes and am using the colour filter/line thickness from plot profile to thicken the text.
If you want drawings to look something like this I can provide the suite of attribs, templates, plotter profiles.
I have removed some data like filename/path and other part attribs that are normally there to automate as much pf the drawing as possible.
I only out put B&W.
VX is very powerful at the printing end BUT with power comes the need for skill(time).
It has taken me some time to get all the dots in a row. If anyone else has extensively mod'd the drawing templates I 'd be keen to see what they have done. One can always learn.
FYI I don't use layers mostly 'cos I don't have a reason to that I am aware of. They might be helpful?
Message 13 of 16
Thank you very much. Like you, my output is B&W. I think all that plotting power comes at a price--complexity. I also think some of it is needed to compensate for missing capabilities such as setting dimension text attributes in dimesnion attributes. I say that, not to belittle VX because I think the geometry engine has a lot going for it, but rather because other software I use and have used output an equal or better plot with a lot less work.
That said, I would appreciate seeing your suite of setup files. I have no doubt I will find them helpful.
I also don't use layers in drawings. I do use them in assembly models. I find VX layers cumbersome compared to other's I've used. But I must say I don't find Solidworks to be a much better.
Message 14 of 16
Message 15 of 16
Instructions (if required):
Place Plotter definitions in your plotter file under x:ProgramsFileVXCorpVX14.50Plotters.
Place Bundles in x:VXCorpUser-14.xx esource
Place Templates in x:VXCorpUser-14.xx esource
You can open Templates and look at them, make changes etc. Just save when doen.
Copy the ones you want and place in yopur own set etc.
Now bundles are diferent 'kettle of fish' and I do not know if you can move individual bundles?
I use Primo PDF as my output so these are set to work with Primo. it's free and for the most part is fine.
I use Foxit reader for PDFs and get rid of the slow Adobe Reader monster.
If things don't work for you, ask questions here.
It was all fine when if left NZ!
Message 16 of 16
- mechanical engineering autocad software free download
- autosave autocad
- cad free download
- freecad tutorials
- catia windows 8
- how to open dwg on ipad
- free 3d cad software dwg
- how to open sid file in autocad
- how to convert text to mtext in autocad
- how to convert autocad bak file to dwg
- drawing a gear in autocad
- how to convert a bak file to dwg
- How to draw elbow in autocad
- free cad download
- how to use mateirals in autocad 2013