English

ZW3D

ZW3D

ZW3D

menu

ZW3D Tips: Differences of Physical Attribute Sources

December 28, 2016     ZW3D Tips physical attributes

In ZW3D 2017, new physical attribute function allows the users to select different calculation sources of the physical attribute and customize the modification.

The difference of four different sources will be introduced, as shown in figure 1.

 

Figure1. Source option of physical attributes

 

Here we divide them into two groups to make a comparison.

“All” VS “Only part”

1)      “All” means that all objects in activated part/assembly will be calculated, including shapes, parts inserted as components, and all shapes and parts of sub-assemblies.

2)      “Only part” excludes the shapes directly created in assembly/sub-assembly. The calculation only covers part entities in all components.

 

Figure 2. Comparison between “All” and “Only part”

 

Let’s take an assembly case, which contains four shapes, two components (A plane and Top plane) and one sub-assembly with one shape and three components, as shown in figure 3.

For a clear comparison, all shapes are displayed in dark grey.

 

Figure 3. An assembly case1

 

 “All in current”--- all objects will be calculated with the current status.

 “Only part in current”--- the dark grey shapes will not be calculated.

 

Figure 4.  “All” VS “Only part”

 

“In current” VS“From origin”

1)      “In current” means the system calculates the physical attribute of models with their current status.

2)      “From origin” means the original data of the models will be used to get the result.

Let’s take an example combine-used with “Assembly cut” function.

 

Figure 5. An assembly case2

 

Refer to the figure below to make an assembly cut operation. Make sure “propagate feature to components” is unchecked.

 

Figure 6.   Assembly cut

 

After that, the top plane part will have different status between the assembly environment and part environment.

 

Figure 7.   Different status between part and assembly environment

 

All in current” --- all objects will be calculated with the current status. It means that top plane shape is calculated with its assembly status.

 

Figure 8. All in current

 

All from origin” --- all objects will be calculated with the origin data. It means that top plane shape is calculated with its part status.

 

Figure 9. All from origin

 

According to the above instructions, we can understand the difference between the “All” and “Only part”, “in current” and “from origin”. Sousers can infer the meaning of each different calculation scopes.

 

Figure 10. Different calculation scopes

 

These four types of sources can be used in different application. Chose a suitable one to calculate the physical attribute according to real requirement.

 

To download this article, please click here.

©2019 ZWSOFT CO., LTD.(Guangzhou) All rights reserved. Privacy Policy.

All other trademarks cited herein are the property of their respective owners.

For your better experience on our website and the display of relevant information, cookies will be used. Learn More