English

ZW3D

ZW3D

ZW3D

menu

Happing CADing with ZW3D: Design a Valentines Gift for Sweetheart

February 12, 2018     ZW3D Tips valentines gift sweetheart

Valentine's day is coming! What surprise will you prepare for your sweetheart?

Look! This attractive valentine gift is designed by ZW3D. It is prepared for any designer.

 

Watch and learn how to finish it step by step.

 

 

 

Figure 1   Valentines Gift

 

Step 1: Create the reference Plane1 and Plane2 by offsetting XZ plane for locating curves.

 

Figure 2   Reference Planne1

 

Step 2: Draw the 3D curves on these three plans

 

  

Figure 3   3D Curves

 

Step 3:Create another two planes by offsetting and rotating the XZ plane for the projection.

       Set parameters as shown in the image below.

 


 

Figure 4   Projection Plane-1

 

Step 4: Project curve1 to plane3 to get curve P1, and project curve2 to plane4 to get P2.

 


 

Figure 5   Project Curve to Plane

 

Step 5Use the same way (Offset value is 0.8mm) to create Plane5/6, and then respectively project curve5/6 to these planes.

 

Figure 6   Projection Curves

 

Step 6: Create the surfaces with loft command.

Select P1 and P3 to create the first loft surface, then select P3 and c5 to create the second loft surface; at last pick c5 and P1 to create the third loft surface. Refer to the image below to define the correct boundary constraints. Sew these three surfaces together.

 

  

Figure 7   Loft Surfaces

 

Step 7: With the same method to create another three surfaces, then sew them together.

 

Step 8: Use surface tools or fill gap command to quickly create the side surfaces.

Now the surface model is changed to the solid model.

 

Figure 8   Solid Model

 

Step 9: Refer to the following image design the connection area to get a smooth shape.

Use two planes to trim the shapes, then create the smooth blend curves. With UV curve mesh tool to design the connection surface.

 

  

Figure 9   Optimize Design

 

Step 10:Insert the diamond component and design a bracket for supporting the diamond.

 

Step 11: Pattern some splints on the surface, as shown in the image below.

 

  

Figure 10   Final Design

 

Step 12: Render your design in KeyShot and get an attractive a Valentines gift for your lover.

 

Figure 11   Product

 

 

To download this article, please click here.

©2019 ZWSOFT CO., LTD.(Guangzhou) All rights reserved. Privacy Policy.

All other trademarks cited herein are the property of their respective owners.

For your better experience on our website and the display of relevant information, cookies will be used. Learn More